DTC U3000:49 [SAS CONTROL MODULE]

id0802g6824800

System malfunction location
•  SAS control module internal malfunction
Detection condition
Warning
•  Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.
•  SAS control module internal circuit has a malfunction
Fail-safe
Not applicable
Possible cause
•  SAS control module malfunction
System wiring diagram
Not applicable

Diagnostic Procedure

ACTION
•  Replace the SAS control module.